COMMON QUESTIONS FOR PAVING STONES
The Paver Company of Sacramento is here to answer all your questions about Paving Stones
Click: Contact Us
Call: (916) 222-8844
How long are The Paver Company paving stones supposed to last?
Paver stones from The Paver Company are manufactured and designed to last a lifetime. Our industry-leading manufacturing processes create top of the line paver stones in terms of strength and durability. For more information on our warranty and guarantee process, contact The Paver Company today.
What must I do to maintain my paver stones from The Paver Company?
With proper installation from our experts, no maintenance is required for your paver stones, and both stones and installation are designed to last a lifetime. If you want a glossy look for your paver stones, you may apply a finishing solution to the paver stones after installation. This will require maintenance as per the instructions on your finishing solution.
What is this white film on my paver stones?
Efflorescence is a white salt deposit that forms on the top of certain kinds of paving stones and concrete as the manufacture components of the paver stones are exposed to weather. It appears as the stones get wet from rain, and will eventually wash and wear off. It is not dangerous, and your paving stones are not being damaged from it. However, if you do not like the appearance of efflorescence, you can easily remove it by scrubbing with a stiff bristle brush.
How will my paver stones from The Paver Company hold up under rain/snow?
Your paver stones from The Paver Company have a convenient texture that reduces slippage and danger from water. As such, your patio, walkway, or pool deck is usable in wet weather as well as dry, and is safer for poolside treatment than standard concrete. Snow can be swept, shoveled, or ploughed off paver stones just as from concrete, and will not cause damage to your paver stones the way it does to wood.
How are The Paver Company paver stones installed?
Our expert installers and craftsmen will first dig out and smooth the area to be paved. Then a layer of sand is added and smoothed completely flat, followed by an aggregate base and the paving stones. The paving stones are set in place using a vibrating plate in order to ensure that they do not move, and joint sand is used to seal the edges.
Contact us for more information regarding your next project in Sacramento (916) 222-8844) fill out the form below: